US LASER CORP: Product Catalog
Harmonic Generation
Harmonic Generator AssembliesThe U.S. Laser Harmonic Generator systems include a cell mounted, angle tuned SHG crystal and a 5 axis adjustable mount. These systems are designed to be used with acousto-optically Q-switched Nd:YAG lasers operating in the fundamental mode (TEM00), and include any optics necessary. Related Products: Harmonic Generator Mount
|
| Part No. | Description: |
| N1007-1 | KTP Intracavity Frequency Doubler Assembly. Used to generated the second harmonic of Nd:YAG at 532 nm. Includes a high quality 3mm x 3mm x 5mm, Type II, A/R coated KTP crystal. A special dichroic front laser cavity mirror is included, which fully reflects the fundamental (infrared) beam, while efficiently transmitting the second harmonic (green) beam. |
| N1007-1-A | As above, but with a heated crystal and temperature controller |
| 1007-2 | KTP Intracavity Frequency Doubler Assembly. Used to generated the second harmonic of Nd:YAG at 532 nm. Includes a high quality 3mm x 3mm x 3mm, Type II, A/R coated KTP crystal. A special dichroic front laser cavity mirror is included, which fully reflects the fundamental (infrared) beam, while efficiently transmitting the second harmonic (green) beam. This is the same system as the N1007-1, except with a smaller crystal for use with lower powered lasers. |
| N1007-2-A | As above, but with a heated crystal and temperature controller |
| N1007-3 | LBO Third Harmonic generator assembly. Used to generate the third harmonic of Nd:YAG at 355 nm. Includes a high quality 3mm x 3mm x 10mm, A/R coated Type II LBO crystal. A special dichroic front laser cavity mirror is included, which fully reflects the fundamental (1064 nm) beam, while efficiently transmitting the second harmonic (532 nm), and the UV (355 nm) beams. This system requires the N1007-1 KTP frequency doubler described above. The LBO THG assembly is used intracavity, and the output from the system is a mixture of both 532 nm and 355 nm outputs. An inline dichroic beam separator assembly (N1015-2) is included, which efficiently rejects the 532 nm output while transmitting the 355 nm UV output. |
| N1007-3-A | As above, but with a heated crystal and temperature controller |
| N1007-4 | BBO Fourth Harmonic Generator assembly. Used to generate the fourth harmonic of Nd:YAG at 266 nm. Includes a high quality 4mm x 4mm x 7mm, A/R coated Type I BBO crystal. This system requires the N1007-1 KTP frequency doubler described above. Because the BBO FHG assembly is used extracavity, the output from the system is a mixture of both 532 nm and 266 nm outputs. An inline dichroic beam separator assembly (N1015-1) is included, which efficiently rejects the 532 nm output while transmitting the 266 nm UV output. |
| N1007-4-A | As above, but with a heated crystal and temperature controller |
| Part No. | Description: |
| N1007-5 | Three mirror cavity accessory |
| N3425 | Replacement mirror for N1007-5 |
Beam SeparatorThe beam separator is used to efficiently separate the fundamental beam from the harmonic in frequency doubled laser systems. Its multiple dichroic beamsplitter design provides a high degree of rejection of the fundamental beam (>106) while its inline configuration makes it significantly easier to use than dispersion prisms. The final dichroic is kinematically mounted to provide beam steering of the output beam. Related Item: Dichroic Mirrors |
| Part No. | Description: |
| N1015-1 | Beam separator assembly, 266 nm (separates 266 nm from 532 nm) |
| N1015-2 | Beam separator assembly, 355 nm (separates 355 nm from 532 nm) |
| N1015-3 | Beam separator assembly, 532 nm (separates 532 nm from 1064 nm) |
Replacement Crystal Cells
|
| Part No. | Description: |
| N1007-7-1 | Replacement KTP doubler cell assembly with 3mm x 3mm x 3mm A/R coated crystal, mounted in cell |
| N1007-7-1-A | As above, but with heated cell |
| N1007-7-2 | Replacement KTP doubler cell assembly with 3mm x 3mm x 5mm A/R coated crystal, mounted in cell |
| N1007-7-2-A | As above, but with heated cell |
| N1007-8-1 | Replacement BBO cell assembly with 4mm x 4mm x 7mm A/R coated crystal, mounted in cell |
| N1007-8-2 | As above, but with heated cell |
| N1007-9-1 | Replacement LBO cell assembly with 3mm x 3mm x 10mm A/R coated LBO crystal, mounted in cell |
| N1007-9-2 | As above, but with heated cell |